I am pretty keen to find about half a metre of stainless steel round tube 2.75" OD (70mm). Preferably with a 2mm wall thickness.
Visiting the link now.
I have a Land Rover Defender and have decided to unbolt a few bits & bob and send them for galvanising. Included will be the side steps. These are...
After posting this question I had a look at it myself.
Found a conversion factor cm to inches x 0.3937
21/64 = 0.328125...
What size hole is this?
I need to determine the size of a hole with means I have available.
An 8.5mm drill bit fits in easily
A 21/64ths drill...
Thank you GarethW,
I also thought of measuring a thread I have to hand which happens to be 10mm. Problem is my vernier gauge is a bit crude. I...
I have noticed pipe and tubing with the wall thickness quoted as SWG10 SWG12 SWG14 etc etc
Please can anyone advise me what thicknesses these...
Will M20 threaded rod slide inside some 20mm ID tubing?
Will M24 threaded rod slide inside some 24mm ID tubing?
This is part of my project to convert my knackered washing machine to wind power to wash my golf practice balls. In my thread...
I have thought about glue. Probably Araldite. As an ex golf professional & golf club manufacturer I have glued thousands of golf...
Thanks again AndrewNew,
Nothing is ever simple.
As well as needing to attach a bolt to the pulley on the washing machine motor I also need to...
Thank you andrewnew,
I have not considered brazing.
The reason I have only considered welding is that a pal has lent me his arc welder. In order...
Just to let you know my project is still very much alive.
At the moment I am concentrating my efforts on getting the stud...
As no reply forthcoming I have googled the subject and now generally understand arc welding would not be the first choice for welding mild to...
I need to weld a bolt onto the pulley connected to a washing machine motor. I am uncertain what the pulley is made of but it is magnetic. I reckon...
Just before anyone spots it.
The 25mm will need to have a 2.5mm wall thickness to be 20mm ID.
Anyone any suggestions for bearings?
I had decided to use some bearings that had come off some bikes (between the pedals) but have...
Thank you spiceage,
Ref keeping oil off the belt. I am considering including a metal disc say about the size of Alan Partridges...
I understand the stress element of extending the shaft. There is no easy solution. If I risk the extended shaft and damage the...
Separate names with a comma.