Hello, I have a problem with my Catia catproduct. One small part and a sketch element (on another part) vanish when I zoom out. I don't have to...
Please send me the reference, sent you a private message.
Your blimp displaces the surrounding air. Every body experiences a certain lift since it displaces air and that air tries to regain its place. All...
Hi all, It's been a while since I've posted. I have a problem I'm stuck on. I'm trying to calculate how much time it will take for a tank to...
Hi fellow engineers, Both EN 14015 and API 650 give guidelines for fuel storage tank design for small internal pressure. In section 10.5.2 of EN...
I have to calculate the heat received by unit surface, heat that has been radiated by 15 cubic meters of refined fuel burning at a distance of 7...
Thanks Steve for your reply, this is the procedure I deduced from what I heard and from my conversations with a CSA representative.
Hello fellow engineers, I am seeking help mainly from Canadian engineers. I am developing a process that will operate in Montreal, Canada and...
The pump curves are really easy to read. On the Y axis, you have the total head in feet or meters which is the resistance of the circuit to...
Although I have done plenty of structural analyses using Nastran, Catia and Ansys, I have never modelled hyperelastic elements. You could try...
Buckling can occur when a beam is under a compressive load that leads to geometrical instability. In your case, buclking can occur at two places...
there are a lot of webinars on various applications on their website
Could you provide a drawing? This would help me understand.
Is the load L in the direction of the rod's length ? Is it applied perpendicular to the rod ? Are any of the rod's ends anchored ? Is the rod...
The linear coefficient of thermal expansion is described as follows : alpha = delta length / ( initial length * delta temperature) This is given...
@ maniacal Question 1 : Thanks for the input, that's what I thought. Question 2 : Thanks for the input. Question 3 : I already have the...
If you don't want to resort to hydraulic thrust to deploy the scissor lift, you could use air pressure instead. If you don't want any jacks or...
If by considering the center of gravity you're refering to calculating the equilibrium ABOUT the center of gravity, this adds unknowns because the...
I could use some help.
Could you provide a drawing of what the angles, velocities and lenghts represent ? I could provide you with basic rack and pinion theory.
Separate names with a comma.
▲
