Yet another way you could go is create your own 'tinnerman' style nut in place. A couple of slits and a hole with the laser and it's likely your...
I would believe it's somewhat similar to printing color over black using the silk screen process. I have two older manuals from Pantone that have...
I would just use springs or gas shocks with a latching mechanism.
Right click on the drawing file name and select the References tab from a SolidWorks Open window.. From there you will be able to redirect the...
I wouldn't suggest using the revision in the part number as stored in CAD. If you change the revision (at least in SolidWorks) all your drawings...
Mark, This issue was covered on the SolidWorks forums some time ago, here's the link: https://forum.solidworks.com/message/311290 To create a...
If you're using Geometric Tolerance's that should be your first direction to take.
Karol, In SolidWorks there's an Option to "Propagate to Parts" check box when working top down. Not sure of how to do it anywhere else.
That design of PEM style standoff will have a lower pull out factor. Have you looked at the B or BS style? These are used when there also is a...
These are available here from http://www.hansonrivet.com/w11.htm Hope this information is still necessary.
Separate names with a comma.
▲
