I'm pretty sure most of these could not really be called copper, including the Beryllium coppers, it's more of an alloy like phosphor bronze or...
That's a long list of copper alloys I never heard of, Many with conductivity below 40% all the way down to as low as 2% if I'm reading that right....
6mm to 1/4 inch thick but I've tested plates from 1 inch to 3mm and the difference between them is small compared to the difference between these...
My understanding is that copper alloys are not copper, they are bronze, aluminum bronze, brass etc. I heard of some different types of copper,...
I have a set of little flywheels that have a magnet to break the motion of the system. I have one aluminum and several copper ones all water jet...
I have an assembly with multiple aluminium parts that have stainless steel levers threaded into them. The parts clamps onto one another and the...
I’ve some small U groove rollers I’m having made and recently I had a brief chat with the company that casts and bonds them onto the hubs. They...
Ok so I just realised this thread is from last year, I'll try and find a more current one to drop the question in.
Hi. I’m trying to ask a question in one of the forums but if I hit the “Post New Thread” button it takes me to a screen where I can create a poll...
One of the problems here and one of the reasons for the threaded shaft idea is how little space there is. The shaft is 14mm though I could push it...
[ATTACH] Here's the set up in SW, thread not represented but you can see where it would be.
We have a small assembly that we have been working on and There is a roller that has to be changed every now and again for different ones. I was...
I’m looking at changing over from stainless to ceramic bearings for something I’m working on and in doing research found a few places that warned...
I’ve been trying my best to do some stress simulations in SolidWorks on a design I’ve made. My problem is that it rests between two rails with a...
You mean like this: [ATTACH]
That's good to know. Thanks for the advice. I've been over the drawings to make sure all the shoulders and bearing counter bores are in the right...
Thanks for the advice, it's really been eating on me. You can work it out on you tube and Wikipedia for most stuff I'm finding but little things...
This is a small rail based dolly I’m making with a set of helical gears inside. The only force that is generated is by it being pushed by hand up...
[ATTACH]
I’m finishing the drawings for my dolly and would like some advice. These panels have one of these tube grips on either side. I’ve 3 different...
Separate names with a comma.
▲
