If you're using AutoCAD, the command is "fillet" When executed, the program will ask for the radius of the fillet which you can input as from 0...
The answer is: (sqrt ((d^2)/2)*2) +c Theory: The length each side is 24†set at 45 degrees. Therefore the flat length of each side is 24â€...
Corrected Posting Based on MY interpretation of what my little slide rule indicates that if you're moving 10,000 lbs of portland cement per hour...
I feel that the mechanism is way too complex. If I understand what you're trying to do, collapse the arm with a rotary motion, then the blue...
It would appear that the horsepower required to power the conveyor is dependant on the mass of the material to be moved and the length of the...
If I understand what you're trying to do, each of the boxes can be supported by the preceding box. The bottom box supported and attached to the...
I think I would approach this from the same general direction with a couple of refinements. You said that your son doesn't have enough strength...
If this is indeed a one-off, you can turn the thread on a steel bar, cut reliefes along the axis and heat treat the bar to make a "home made" tap...
A different thought might be to use corn cob in place of shot or media. It will polish the surface and remove small amounts of contaminates. As...
Separate names with a comma.
▲
