• Welcome to engineeringclicks.com
  • 27th Oct 2012: Holy Grail of Mechanical Design ...and more hot topics!

    Discussion in 'Newsletters' started by GarethW, Oct 27, 2012.

    1. GarethW

      GarethW Chief Clicker Staff Member

      Jul 2009
      Likes Received:

      Hot topics
      [​IMG]Holy Grail of Mechanical Design?
      We have many pictures and videos of the device in action and a number of replications are already in progress. This project was started by the inventor in 2009 and he has manufactured 11 different prototypes to get to this stage. I am directly liasing with the inventor. I hope you all find this message interesting and I look forward to sharing.....
      [​IMG]Inverted scissor lift used as a rigid slewing hoist
      Basically the design incorporates 3 pairs of arms with pivots being positioned 600mm either side of the central pivot. It has vertical movement of around 1500mm using two 300mm stroke cylinders. The system is required to lift 1000kg and uses two hydraulic.....
      [​IMG]Insulative material working at 200 'C temprature?
      need a bolt for powder coating process but the material should be electrically insulative and should resist 200 C temperature. because it needs to go in the oven after the implementation of the powder coating.???? Please help me out from this situation....????
      [​IMG]Wear Calculation
      Ok, dusting the cobwebs off.... Looking for a formula to calculate wheel tread wear. Anyone?
      [​IMG]Product design for emerging markets
      If you are responsible in introducing your products to emerging markets, what do you think are the major challenges involved in designing products for emerging markets?
      Click here for more hot topics
      Unanswered questions
      [​IMG]Help with Vehicle Supension Design
      I was wondering if someone could point me in the right direction as far as reference texts or other material for the analysis and design of vehicle suspensions. I have a project truck that I'm working on and want to make sure that I'm taking all pertinent forces and factors into consideration with the design of.....
      [​IMG]mapkeys from pro engineer
      how to use mapkey option from pro engineer?
      [​IMG]Design Rotational Moulding Arm
      I need help from forum members. I have problem on how to design rotational moulding arm. I don't know how to calculate the motor torque needed to rotate the arm. anybody can help me? thank you for your cooperation.
      [​IMG]Large Aluminium Part Manufacturer
      I am working on a university project and am trying to find the best way to manufacture the part in the attached image out of aluminium if the product was put into production, but because of it's size I'm not sure what the best option would be, it would also be best if there was a hole running through it......
      [​IMG]mechanical timer
      Hi, does anyone know where I can lay my hands on a 3D CAD of a mechanical timer?
      Click here for more unanswered questions

    Share This Page