• Welcome to engineeringclicks.com

    • Another basic question

    Discussion in 'The main mechanical design forum' started by Outofmydepth, Nov 12, 2010.

    1. Outofmydepth

      Outofmydepth Active Member

      Joined:
      Oct 2010
      Posts:
      31
      Likes Received:
      0
      I have noticed pipe and tubing with the wall thickness quoted as SWG10 SWG12 SWG14 etc etc

      Please can anyone advise me what thicknesses these are?

      Thanks

      Outofmydepth
       
      Outofmydepth, Nov 12, 2010
      Outofmydepth, Nov 12, 2010
      #1
    2.  
    3. AndrewNew

      AndrewNew Well-Known Member

      Joined:
      Jul 2010
      Posts:
      73
      Likes Received:
      0
      SWG = standard wire gauge. SWG14 = 2.03 mm. The bigger the SWG number, the lower the wall thickness. This page has conversions:

      http://www.pipesntubes.com/carbonsteelb ... weight.htm

      Tube is specified by outside diameter and wall thickness, pipe by inside diameter and wall thickness.

      Cheers

      Andrew
       
      AndrewNew, Nov 12, 2010
      AndrewNew, Nov 12, 2010
      #2
    4. Outofmydepth

      Outofmydepth Active Member

      Joined:
      Oct 2010
      Posts:
      31
      Likes Received:
      0
      Thank you,

      Outofmydepth
       
      Outofmydepth, Nov 12, 2010
      Outofmydepth, Nov 12, 2010
      #3

    Share This Page

    ▲

    1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies.
      Accept Learn More.
      Dismiss Notice