• Welcome to engineeringclicks.com
  • clutch selection

    Discussion in 'The main mechanical design forum' started by medo79, Jan 23, 2010.

    1. medo79

      medo79 New Member

      Joined:
      Jan 2010
      Posts:
      1
      Likes Received:
      0
      Dear all,
      I am looking for lightweight controllable clutch in both engaged and disengaged modes such as (electromagnetic, pneumatic, hydraulic clutch, etc.) which works under the following conditions:
      1- Maximum speed=80rpm
      2- Continous rated torque=60N.m
      3- Maximum peak torque= 150N.m
      4- maximum allowable weight is 0.5kg
      This clutch will be controlled to either engaged or disengaged in both CW and ACW directions.
       
    2.  
    3. aknotley

      aknotley Active Member

      Joined:
      Jul 2009
      Posts:
      32
      Likes Received:
      0
      Hi there. I had a look here. Is there anythnig of use there? I'm not sure that most of these clutches are man enough for the job.
       

    Share This Page