• Welcome to engineeringclicks.com
  • design of spur gear

    Discussion in 'The main mechanical design forum' started by adapa, Apr 15, 2010.

    1. adapa

      adapa Member

      Joined:
      Apr 2010
      Posts:
      6
      Likes Received:
      0
      Hi friends,

      I want to design a spur gear. inputs are tangential force on gear teeth is 20N. plz guide if any one know how to design a spur gear.
       
    2.  
    3. mvalenti

      mvalenti Well-Known Member

      Joined:
      Nov 2009
      Posts:
      257
      Likes Received:
      0
    4. adapa

      adapa Member

      Joined:
      Apr 2010
      Posts:
      6
      Likes Received:
      0
      thank u very much,but i want to calculate theoritically. i hope any one can help me to solve this problem.
       
    5. kvengel

      kvengel Member

      Joined:
      Feb 2010
      Posts:
      6
      Likes Received:
      0
      I would buy Machine Design by Norton,

      Excellent book!

      K :mrgreen:
       
    6. Cardboard

      Cardboard Guest

      agreed that book is excellent i also have in front of me
      Machine Design theory and practise by Aaron D. Deutschman, Walter J. Michels and Charles E. Wilson another useful book
       
    7. gupta9665

      gupta9665 Well-Known Member

      Joined:
      Mar 2010
      Posts:
      64
      Likes Received:
      0
    8. mymachineinfo

      mymachineinfo Member

      Joined:
      May 2015
      Posts:
      15
      Likes Received:
      0
      for anyone who still needs this information:
      The main factors affecting the strength of spur gear is a module or diametral pitch (DP).
      Selection of module is determined by power requirement and speed of pinion gear. In this case, if tangential force in 20N, so Power requirement = F (Tangential force) x V (velocity m/s). ==> you must be know gear speed (rpm)
      for next calculation read more ==> http://www.mymachineinfo.com/2015/05/calculation-of-spur-gear.html
      thanks.
       
    9. keeptryingit

      keeptryingit New Member

      Joined:
      May 2015
      Posts:
      1
      Likes Received:
      0
      Very helpful guys, thanks alot.
       

    Share This Page