• Welcome to engineeringclicks.com
  • Forging Operations

    Discussion in 'The main mechanical design forum' started by usmananas, Jun 5, 2016.

    1. usmananas

      usmananas New Member

      Apr 2016
      Likes Received:


      This is connected to build the cross sectional area of the stock at the expanse of the length. To accomplish the length of annoying power is connected in a course parallel to the length axis, For example shaping of a bolt head.
      3: Fullering
      It a like to material cross-area is minimized and length expanded. To do this; the base fuller is kept in point gap with the warmed stock over the fuller ,the top fuller is then kept over the stock and afterward with the sledge hammer, and the power is connected on the top fuller.
      4: Bending
      Bending is exceptionally regular producing operation. It is an operation to give a swing to metal bar or plate. This is required for those which have bends shapes.
      5: Edging
      It is a procedure in which the metal piece is dislodged to the desired shape by striking between two passes on edging is as often as possible as essential drop forging operation.
      for complete review click here

    Share This Page