• Welcome to engineeringclicks.com
  • Help need to learn Unigraphics

    Discussion in '2D and 3D CAD general discussion forum' started by tmgfigueiredo, May 22, 2013.

    1. tmgfigueiredo

      tmgfigueiredo New Member

      Joined:
      May 2013
      Posts:
      1
      Likes Received:
      0
      Hello everyone,


      I'm new unigraphics user, at this momente i'm using NX8.0, very soon i will be using NX8.5. In the past i had used solidworks, and i would like to use some useful comands that solidworks use, in NX. For example, i haven't find anything like toolbox, or configurations on parts, probably i haven't discover things like that.


      Something that i would like to know in unigraphics:


      -configurations:


      atQ9dCepg6Q


      I see a quite usefull help in assembly, for example change a cylinder of 100 mm of stroke to a 200 mm of stroke just changing the configuration in assembly without need to make a replace component.


      - Smart components


      Define some "smart features" to some library components, and after placing them in assembly, make them appear in the sorrounding objects


      sPuFaP0Me_4


      - Insert automatically components (screws for example)


      15yAFSRsPZc


      I have used some links to youtube to try to explain what i want to use in unigraphics, all of these videos are related to solidworks.


      Can anyone help me with these?


      Thanks in advance
       
    2.  
    3. pramit007

      pramit007 New Member

      Joined:
      Sep 2013
      Posts:
      1
      Likes Received:
      0
      its always good to start training from professionals and you tube trainings are scattered.
      Yes you have tool box similar options for configuring standard parts found in left side browser and u can also configure your customize parts.
       

    Share This Page