• Welcome to engineeringclicks.com
  • Is computer-based design analysis (FEM, CFD…) to be performed by an engineering desig

    Discussion in 'The main mechanical design forum' started by hokanp, Oct 12, 2014.

    1. hokanp

      hokanp New Member

      Joined:
      Oct 2014
      Posts:
      3
      Likes Received:
      0
      Is computer-based design analysis (FEM, CFD…) to be performed by an engineering designer (partly) or solely by a design analyst or by both? Help wanted to answer a brief survey.
      We would very much appreciate your help and that of your company in answering a few questions on whether and – if so - how and by whom Computer-Based Design Analysis (CBDA) is performed in your company. The survey is part of a larger project at Lund University/Halmstad University in Sweden, aiming to provide a research-grounded concept of CBDA in the industry of tomorrow.

      Link to the introductory letter http://dm.quicksearch.se/s/wf.asp?s=18815E6AZA405
      Link to the survey: http://dm.quicksearch.se/s/wf.asp?s=5B401C15Z68D7.
      Your participation is highly appreciated!
       
    2.  
    3. KevinC

      KevinC Well-Known Member

      Joined:
      Jun 2011
      Posts:
      72
      Likes Received:
      0
      Design Engineer majorly, but there are also people who will use it without being an engineer.
       
    4. hokanp

      hokanp New Member

      Joined:
      Oct 2014
      Posts:
      3
      Likes Received:
      0
      Hello
      I am pushing this. Please help me with the survey. It will be open little longer.
      Thanks
       

    Share This Page