• Welcome to engineeringclicks.com
  • is Creo or Pro/Engineer fail to solve this problem?????

    Discussion in 'Creo or Pro/Engineer' started by fisa, Mar 31, 2013.

    1. fisa

      fisa New Member

      Joined:
      Mar 2013
      Posts:
      2
      Likes Received:
      0
      hello

      i am fisa and a new member of this forum.....i have a issue first with creo and 2nd with my self....and idont know wat i do for it....the problem is that... i just want to drills with right angle attachment on cnc 3 axis milling.... without writing or modify the g-code file thru pro-nc drilling cycle and generate the g-code thru post processor.......but i see there is no support in creo for it...and also on the web i am searching the solution from last 30 daysss but no sucess....need help that way i am heere.please gime me some solution...

      thanks

      fisa
       
    2.  
    3. CPPMable

      CPPMable Well-Known Member

      Joined:
      Nov 2012
      Posts:
      100
      Likes Received:
      0
      You must save to an .stl file and convert to G-Code. The basic version on Creo and Pro Engineer you are probably using has not CAM applications installed as they cost more money. There are many free programs out there than can convert basic .stl files to G-Code for you.
       

    Share This Page