• Welcome to engineeringclicks.com
  • Learn About Conformal Cooling For Injection Molding Applicat

    Discussion in 'Metal casting & moulding' started by GPIprototype, Nov 25, 2009.

    1. GPIprototype

      GPIprototype Member

      Joined:
      Oct 2009
      Posts:
      21
      Likes Received:
      0
      http://directmetallasersintering.blogspot.com/

      Conformal cooling is defined as the ability to create cooling/heating configurations within a tool that essentially follows the contour of the tool surface or deviates from that contour as thin/thick sections of the part may dictate for optimal thermal management. The objective typically is to cool or heat the part uniformly. Conformal cooling provides a tremendous advantage in mold tooling through significant reductions in cycle times. Other than the obvious piece-cost savings, other tangible benefits include tool, equipment and floor space savings.

      CHECK OUT THE BLOG TO LEARN A LOT MORE ABOUT CONFORMAL COOLING

      http://directmetallasersintering.blogspot.com/
       
    2.  

    Share This Page