• Welcome to engineeringclicks.com
  • Loading in a double-wishbone Car Suspension System

    Discussion in 'The main mechanical design forum' started by Sid, Oct 31, 2012.

    1. Sid

      Sid New Member

      Feb 2012
      Likes Received:
      I was looking at modelling on ANSYS one of the pin-jointed components in a Double-Wishbone Car Suspension. However, I am a bit stuck with how I would represent the component in 2D whilst including applied loading and boundary conditions. I understand that the pin-jointed structures try to restrict rotational movement in all three planes, and that if the wheels rotate with respect to the Y axis (My rotation) the wheels pull the car in the forward direction (positive X direction) and as the wheels turn (Mz rotation) the car is pulled in the lateral direction (Y direction) and that these forces are carried through the rigid wishbone arms. I'm not too sure how to visualise this though, any help would be great.

    Share This Page

    1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies.
      Dismiss Notice