• Welcome to engineeringclicks.com
  • Manufacturing production line

    Discussion in 'Manufacturers of mechanical parts' started by sokhips, May 11, 2010.

    1. sokhips

      sokhips New Member

      Joined:
      May 2010
      Posts:
      4
      Likes Received:
      0
      namaste all...

      have found the forum informative and helpful...hope i get some for this one too..
      Below is the welding setup v have been using offering welding services to heavy manufacturing industries
      L&t etc...
      Now looking out for manufacturing productline using the setup
      which aspect of the mechanical engg design is suitable for using our setup in production line ?

      Heavy duty Rectifier 600amps - Memco - 1
      Heavy duty transformer 400amps oilcooled - UK made - 1
      High Frequency with water colling system With DC suppresser unit - Aluminium welding - 1
      Complete Oxt-Acetylene Gas - Cutting Brazing and
      3 portable grinder
      1 valve set grinder or pedestral
      Electrode heating unit 400amps - 1
      All tools n tackles with loading unloading 3.5 tonns for fabrication n welding

      regds
      QWE
       
    2.  
    3. garnettools

      garnettools Member

      Joined:
      Feb 2010
      Posts:
      24
      Likes Received:
      0
      Re: manufacturing productline

      I think your question is not clear "aspect of Mechanical Design"???
      Please clarify
       
    4. yuewood

      yuewood New Member

      Joined:
      May 2010
      Posts:
      2
      Likes Received:
      0
      Re: manufacturing productline

      "have found the forum informative and helpful...hope i get some for this one too",but it seems like promotion your product!
       
    5. sokhips

      sokhips New Member

      Joined:
      May 2010
      Posts:
      4
      Likes Received:
      0
      not at all..we were trying to explore how the setup cud be used in putting up some production line..as we have used this setup for more than 20 yrs now..
      rather than selling or giving it to someone or reusing the same..these were options we ver lookin out for..

      hope my query is clear now..no promotion..we have using our welding expertise experience so far..

      thank all for reply/help
       

    Share This Page