• Welcome to engineeringclicks.com
  • Mechanical Engineering Important Question

    Discussion in 'The main mechanical design forum' started by aghaderi, Nov 14, 2015.

    1. aghaderi

      aghaderi New Member

      Nov 2015
      Likes Received:
      Hi Guys,
      So I have this project that it’s a bit complicated to explain. Imagine that you have a square like in Figure1. There are some small parts that will be moving in this square only. These parts have to be interconnected and they have to build up and move to the top as shown in Figure 2. So there is a test that it has to be done on these small blocks and if one of them falls out there should be another block that has to move automatically and then fills in the gap as shown in Figure3 (Generally fill in the block that’s missing). I really don’t know anything about mechanical engineering so please don’t judge me. I’m an Electrical Engineer so please if you have any idea how I could design this thing that would be a life saver. Again any help will be deeply appreciated.
      Thank you.
    3. Dana

      Dana Well-Known Member

      Sep 2010
      Likes Received:
      You would have to describe the operation and parts more fully before anybody could suggest how to do it.

    Share This Page

    By using this website you agree to our Cookies usage. We and our partners operate globally and use cookies, including for analytics, personalisation, ads and Newsletters