• Welcome to engineeringclicks.com
  • Mechanical Properties at high temperature

    Discussion in 'The main mechanical design forum' started by mri44, Apr 2, 2011.

    1. mri44

      mri44 New Member

      Apr 2011
      Likes Received:
      At first, My cordial respect to all members.

      I need help regarding my research study.
      I read a paper by Yaguchi, M., T. Ogata, and T. Sakai, Creep strength of high chromium steels welded parts under multiaxial stress conditions. International Journal of pressure Vessels and Piping, 2010. 87(6): p. 357-364.

      From this paper, i selected a specimen. Now i need some mechanical properties.
      Specimen: Welded 9 Cr steel Tube (9Cr-1Mo-V-Nb)
      Parent material: P91 steel
      Weld material: TGS-9Cb

      I need the Mechanical tensile properties (At 650 C) for both P91 (Base Metal) and TGS-9cb( Weld Metal).

      The properties are,

      At 650 C

      Poison’s ratio, ? = ?
      Yeild Strength, ?y (MPa) = ?
      Yeild Strain, ?y = ?
      Ultimate tensile strength, ?UTS (MPa) = ?
      Ultimate tensile Strain, ?UTS = ?

      Without these properties, i can not go ahead with my research study. I have no other way but to ask you for help.

      Any kinds of help would appreciated.

      May God Bless you all.

      Waiting for your valuable advice.
    3. Wmech

      Wmech Member

      Apr 2013
      Likes Received:
      Hi mri44

      I don't have any experience with both materials at high temperature. I think if you want to have accurate data. However, I can recommend to you some of the books that may contain such data.

      Creep and Fracture in High Temperature Components : Design and Life Assessment Issues

      you can also check the website: http://www.matweb.com to find the materials

      Good luck

    Share This Page

    1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies.
      Dismiss Notice