• Welcome to engineeringclicks.com
  • Precautions for aluminum alloy die-casting shell in the die-casting process

    Discussion in 'Metal casting & moulding' started by MIA WANG, Oct 21, 2021.

    1. MIA WANG

      MIA WANG Member

      Sep 2021
      Likes Received:
      First, consider the issue of mold release.

      Secondly, considering the wall thickness of aluminum alloy die-casting, the thickness gap filled is too large.

      Third, in the structure, try to avoid the appearance of the structure, resulting in a complicated mold structure, and having to use multiple cores or spiral cores.

      What are the issues that need to be paid attention to during the die-casting process of aluminum alloy housing?

      Fourth, some die-cast parts may have special requirements, such as fuel injection.

      Fifth, the design considers mold issues. If there are multiple positions of the core, try to put the two aspects, it is best not to put the lower core, so the time is very long, the aluminum alloy die-casting core will have problems.

      #Alumunumdiecasting #diecasting #diecastingparts

      Website: http://www.sunmise.com/

      Email: [email protected]

    Share This Page

    1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies.
      Dismiss Notice