• Welcome to engineeringclicks.com
  • Pro/E Mechanical Design Engineer - Frankfurt, Germany

    Discussion in 'Europe jobs' started by ICP Search Recruitment, Nov 12, 2013.

    1. ICP Search Recruitment

      ICP Search Recruitment New Member

      Nov 2013
      Likes Received:
      My client is a global leader in the development of new technologies and equipment for semiconductor equipment. In order to expand their activities in this area in Mainz/Frankfurt, they are looking for a Mechanical Design / CAD Engineer.


      • Mechanical Design
      • Definition of Specifications
      • CAD Constructions
      • Supplier Selection
      • Construction and commissioning of the prototype
      • Support the manufacturing during the construction of prototypes
      • Documentation and support the transfer into production (USA)


      • Demonstrable experience in the development in the field of mechanical engineering, equipment manufacturing, optics and precision engineering
      • Good technical skills to build the constructed devices
      • Degree FH / TH in the areas of mechanical engineering, precision engineering , mechatronics
      • Good knowledge of CAD, ideally Pro Engineer Wildfire
      • Experience in dealing with PDM systems
      • Manufacturing and service -friendly design
      • Understanding of adjacent areas, in particular optics, electronics, camera and laser technology
      • Very good knowledge of spoken and written English


      • You are creative, optimistic and always solutions-driven
      • Ready to break new ground.
      • You are communicative and enjoy working in a team
      If interested, please contact me with updated CV in word format.
    3. TejaSingh

      TejaSingh New Member

      Jan 2014
      Likes Received:
      For Job Vacancy

      [email protected]
      Contact no:+91 9441176959​

      Career Objective:

      To secure a challenging position and build my career in my enthralling passion, by exploring the depths of the concepts and being resourceful for the growth of the company and myself.

      Career Sum-up:
      · 6 Months experience in piping engineering activates.
      · Undergone training on CAESAR and SP3D.
      · Have done pipe routing, Equipment modeling & structural modeling on SP3D.
      · Can perform pipe stress analysis activates like, pipe stress analysis, Inputting on CAESAR II, Report preparation and preparation of isometrics.
      · Good working experience on providing pipe supports for critical lines and non-critical lines
      · Understanding of all piping documents also familiar with standard codes like ASME B31.1
      · Good communication skills, Ability to deal with people diplomatically, willingness to learn, team facilitator.

      Technical Skills:

      · Programming Language : C-language.
      · Design Software : Catia V5R20, Cero(1.O), SP3D, PDMS, AutoCAD
      · Analysis Software : Ansys (12,13,14), CAESER-II
      · Operating System : Linux, Windows

      Academic Record:
      CourseSchool/CollegeUniversity / BoardYear of Passing Percentage of marks
      ( Mechatronics )
      Vignan University
      Vignan University2013
      Vignan Jr. College.
      Board of Intermediate Education.200964
      10[SUP]th [/SUP]Class
      The Pearls schoolBoard of Secondary Education.200755.5
      Project Details:
      · Project Title: 3D modeling and stress analysis of piping system in a plant.
      · Done 6 months Project/Internship at SwajayaTechnologiesPvt.Ltd. at Hyderabad, for partial fulfillment of requirements for the award of the Bachelors Degree.
      Project Name : (1x15) MW
      Client Name : BHEL
      Software : SPR, Caeser-II.
      · Responsibilities Include:
      · Designing of pipe Isometrics/lines with Equipments.
      · Preparation of Stress Analysis for Critical Line list.
      · Preparation of Supports and Spring Hanger Schedule.
      · Preparation of Support Load Data and passing the same to Civil.
      · Co-ordination with the other Engineering Departments.
      · Pipe routing based on piping layout.
      · Rack pipe modeling from P&ID and Study piping layout.
      · Isometric Extraction and Checking.
      · Pipe supports for critical lines and non-critical lines.
      · Equipment modeling, checking nozzle orientation, Vendor data checking.

      · Project Title: Pipe routing analysis through CGC.
      · Done a project at Converses Technologies, Hyderabad using SP3D.
      · Responsibilities include:
      · Studying P & ID’s PFD, PMS.
      · Pipe routing based on piping layout.
      · Rack pipe modeling from P&ID and Study piping layout.
      · Isometric Extraction and Checking.
      · Pipe supports for critical lines and non-critical lines.
      · Equipment modeling, checking nozzle orientation, Vendor data checking

      Extra-curricular Activities:
      · Participated In Blood Donation Awareness Camp Conducted at Vignan University.
      · Taken Part in National Level Youth Festival — VignanMahotsav (2012) held at Vignan University as Core Committee Member.
      · Participated In TARANG 2011, A Techno Cultural Fest Organized by YUVI Organization.

      Personal Details:

      Date of Birth : 05-08-1992.
      Languages Known :Telugu, Hindi, and English.
      Passport : Yes
      Permanent Address :D.No:5-37-113, 4/17Brodipet, Guntur, Andhra Pradesh, Pin: 522 002.


      I hereby acknowledge that all the details given by me above are true to be the best of my knowledge.
      Place: SIGNATURE
    4. yvetri

      yvetri New Member

      Jun 2015
      Likes Received:
      Dear Sir,

      I'm a post graduate mechanical engineer with 9+years of experience in Design and Presently working at Mold Masters, Germany. Herewith i have attached my CV for your kind reference for the position "Design Engineer". Please review it and let me know if you have requirement.

      Thanks and Regards

      M.Vetrivel M.E.,
      +91 98948 52024(India)
    5. Vipul143

      Vipul143 Member

      Nov 2014
      Likes Received:
      Patel Vipul Himatbhai.
      (B.E.Mechanical with 05 years of experience as a Mechanical Design ENGINEER)

      Mobile No.: +91 9714089920, +91 9033008538
      Email : [email protected] , [email protected]
      Address:- B-21, Patanjali society, Nr: Gayatri School, Khodiayarnagar Cross Road, Bapunagar,
      Ahmedabad-382350. Gujarat, India.

      Carrier Objectives

      To make the optimum use of my strength and capabilities to get the best result and to contribute the maximum share in the success journey of the organization to work as the most efficient and responsible engineer in organization.

      Technical Skills:-

      Ø Computers Aided Design Software: - Solid Works 2014. (Currently working), Auto-cad (Currently Working) Pro-E. Solid Edge (Basic Level )
      Ø Analysis Software :- Solid Works (Basic Simulation Express)
      Ø In depth knowledge of Design Software like Auto Cad, Solid Works.
      Ø In depth knowledge of operating ERP (Oracle).
      Ø Comprehensive knowledge of Manufacturing Processes and Supply chain principles of mechanical engineering.
      Ø Sound knowledge of general machining techniques and various manufacturing processes.
      Ø Comprehensive knowledge of Product Lifecycle Management and computer-aided engineering and GD&T.
      Ø Familiar with industrial equipment and machinery, Transport System and Heating and cooling systems.

      Key Responsibilities Handled:-

      Ø Responsible for compete mechanical design of High pressure Triple Plunger Pump and Prepare systems as per Application.
      Ø Assigned with the tasks of Selection of material as per application wise, Bearing, Shaft Material.
      Ø Assigned with the responsibilities of creating the Dimension Drawing, Main Assembly Drawing, Part Drawing and the Complete Bills of Material for All systems.
      Ø Responsible for analyzing the Vibration and Noise levels in Triplex plunger pump.
      Ø Responsible for analyzing the incoming enquires from sales department and preparing accurate General Arrangement and P&ID Layout Drawing.
      Ø Responsible for designing the base frames to mount the Motor and Pump as per systems application.
      Ø Responsible for establishing the specifications for the material procurement and play active role in helping the purchase Dept. in developing these new material.
      Ø Helping the service team in trouble shooting and overhauling of Pump.
      Ø Assigned with the tasks of planning, conducting providing guidance to staff in areas of mechanical design development.
      Ø Handled the job of checking, correcting the complete Bills of Material (BOM) of a machine before it is released for manufacturing.
      Ø Handled the job of checking, correcting the Drawings of Components of a machine before it is delivered for manufacturing.
      Ø Assigned with the task of studying International standard and finding the Equivalent Indian Standards.
      Ø Solving problems in the shop floor by working closely with production people involved in fabrication, machining, assembly and testing areas.

      Field of interest

      Ø Design department.
      Ø Research & development.
      Personal Skills:-

      Ø Positive Attitude.
      Ø Self-Motivated.
      Ø Leadership Quality.
      Work Experience

      Ø 1). Company: PressureJet System Pvt Ltd
      Vatva, Ahmedabad.
      Department: Design Department
      Designation: Sr. Design Engineer

      · I have 02 years of Experience as a Sr. Design Engineer. (DDA)

      PressureJet (An ISO 9001:2008 certified company) is a leading manufacturer of high pressure triplex plunger pump and complete system. Product range includes pressure up to 2800 bar, flow rate up to 770 LPM and power up to 500 HP.
      PressureJet offers exclusive solution for Hydro Jetting, High Pressure Cleaning, Hydrostatic Pressure Test, Feeding, Dosing, Paint & Rust Removal, Feeding in Reverse Osmosis Plant and many more other applications.

      · Work Responsibility
      · I am currently working on Solid Works and Auto-cad.
      · Research and development for new machine product & Modification of Existing product.
      · New Product Development.
      · Prepare Bill of material.
      · Prepare technical document parameter for Sales, purchase, Quality Control, Production Department.
      · Support sales department for technical issues & selection product.
      · Create new drawing by measuring objective (Reverse Engineering )
      · Find Rout cause Work.
      · Discuss with client for technical requirement & issues.
      · New application technical data collection.
      · Prepare G.A drawing & Line Diagram as per client requirement.
      · Machining process selection.

      Ø 2). Company: Gmm Pfaudler Ltd.
      Karamsad, Anand
      Department: OE Engineering
      Designation: Design Trainee Engineer

      · I have 1year of Experience as a management trainee in Gmm Pfaudler Ltd. (Design Department)

      GMM Pfaudler glass lined Glasteel equipment are the long-recognized standard in the chemical process
      industries and are engineered and built per ASME code Section VIII Div. 1.
      GMM Pfaudler's Reactors range from 63 Liters to 50000 Liters and are manufactured to DIN 28136 and Glass lined as per DIN 28063.
      · Work Responsibility
      · Prepare G.A drawing as per client requirement.
      · Prepare detail drawing as per new design or G.A drawing
      · Prepare Bill of material.
      · Discuss with client for technical requirement & issues.

      Ø 3). Company: Ruby bus pvt. Ltd.
      Ahmadabad. (Naroda)
      Department: Design Department
      Designation: Design engineer

      · I have 1 year of experience as an executive engineer. (Design department).

      Ruby Bus Pvt. Ltd. has been a part of the Indian Bus Body Building industry for over five decades. The advancement in design, plant and machinery, the installation, and the production as well as the development of the new products and process is executed with the help of professionals and technical staff.

      · Work Responsibility
      · Working on Pro-E and Auto-cad.
      · Prepare G.A drawing as per client requirement.
      · Prepare Structure drawing as per new design or G.A drawing.
      · Prepare development drawing for bending process.
      · Create new drawing by measuring objective (Reverse Engineering )
      · Prepare Bill of material.
      · Generate Bills of material in ERP systems
      · Discuss with client for technical requirement & issues.
      · Support sales department for technical issues solve.

      Ø 4). Company: Batliboi ltd.
      Surat (Udhna.)
      Department: Design Department
      Designation: Trainee engineer.

      · I have 1 year of experience as a Graduate Engineering Training (Design department).

      Batliboi Textile Engineering Group is among the foremost players in the Indian Textile Engineering Industry. It is a well-known supplier for a wide range of world-class equipment and a leader in Textile Engineering System.

      · Work Responsibility
      · Prepare part drawing as per G.A drawing.
      · Create new drawing by measuring objective (Reverse Engineering )
      · Prepare Bill of material.
      · Prepare development drawing for bending process.
      · Generate Bills of material in ERP systems.

      Educational Qualification

      Profile : Bachelor of Engineering. (Mechanical)
      University : K.S.K.V. Kachchh University
      Institute : Government Engineering College, Bhuj.
      Ø I have got aggregate Percentage in all of semesters 64.70%.
      QualificationBoard/UniversitySemesterPercentageClassYear of Completed
      B.E. MechanicalK S K V Kachchh University. (Bhuj)8[SUP]th[/SUP] sem.68.44%Distraction (71.1%) 2010
      7[SUP]th[/SUP] sem.73.73%
      10[SUP]th[/SUP] (S.S.C.)G.S.E.B.---61.00%First-class2004

      Industrial Training

      Ø I have completed industrial training in HI-TECH INDUSTIRES.
      Company: Hi-tech industries
      Ahmadabad (Naroda).
      Hi-Tech Industries makes a weight loading crane manufacturer.


      Ø Commitment to perform duty with smart work, honesty, perseverance and faithfulness.
      Ø Self Motivation to provide better service.
      Ø Stick to work until it complete.

      Personal details:-

      Ø Date of Birth : 24[SUP]th[/SUP] Nov 1988
      Ø Cast : Hindu
      Ø Gender : Male
      Ø Nationality : Indian
      Ø Marital Status : Married
      Ø Languages known : English, Hindi, Gujarati.
      Ø Hobbies : Playing cricket, Riding a Cycle, Driving, and Listening Soft Music.


      [h=2]Ø I hereby declare that above mentioned information are correct to my knowledge and I accept the responsibility for any misrepresentation.[/h]
      Vipul H. Patel

    Share This Page

    1. This site uses cookies. By continuing to use this site, you are agreeing to our use of cookies.
      Dismiss Notice