• Welcome to engineeringclicks.com
  • Table top chain Design

    Discussion in 'The main mechanical design forum' started by Ansori, Jul 18, 2013.

    1. Ansori

      Ansori New Member

      Joined:
      Jul 2013
      Posts:
      1
      Likes Received:
      0
      Dear all,

      I have made same table top chain conveyor. this conveyor will be used for transferring glass bottle from the bottle forming machine to the packing table (for packaging).
      I have made 2 models / types of conveyor. They are straight conveyor and turn conveyor. I don't have any issue and problem with the straight one. But, for the turn conveyor, table top chain can't move smoothly. it can makes my bottle falling over. Any suggest from you all?

      Motor : 0.75 Kw
      Type of Table top chain : sideflexing K450 (Rex-LF880 K450)
      Length : +/- 4000 mm
      Angle of turn : 30 - 40 deg

      Thanks for your help.
       
    2.  
    3. scotty9782

      scotty9782 New Member

      Joined:
      May 2013
      Posts:
      1
      Likes Received:
      0
      Hi do you have any images of the conveyor in question il have a look I completed a very similar sounding project earlier this year.
      You can email me if this is best please ask and il send you address
       
    4. srdfmc

      srdfmc Well-Known Member

      Joined:
      Jun 2011
      Posts:
      114
      Likes Received:
      0
      Hi,

      You probably need to get a more powerful motor. Call the supplier or hve a look at the datasheet. With the angle, you're probably out of the range were it deliver a smooth torque.
       
      Last edited: Aug 6, 2013
    5. mechaboy

      mechaboy Active Member

      Joined:
      Aug 2013
      Posts:
      38
      Likes Received:
      0
      maybe speed of conveyor is high for bottles when they turn and you must reduce it
       

    Share This Page