• Welcome to engineeringclicks.com
  • UK furniture Manufacturer

    Discussion in 'Manufacturers of mechanical parts' started by rory_way, Mar 16, 2015.

    1. rory_way

      rory_way Member

      Joined:
      Sep 2014
      Posts:
      6
      Likes Received:
      0
      Hi there, I'm looking for a UK based furniture manufacture to produce a prototype of a filing cabinet for me (and hopefully further batches of 50-100).

      The product is wood and metal. The wooden parts are circular approx 600mm in diameter and 20mm deep with a circular section in the middle going down to about 5-10mm. There may be some welding of the metal required.

      I have suppliers who can do the metal, so if you can just do the wood that's fine.

      Cheers.
       
    2.  
    3. grkadisch@rogers.com

      grkadisch@rogers.com New Member

      Joined:
      Mar 2015
      Posts:
      3
      Likes Received:
      0
      Look into store fixture and display fabricators; they work with the materials you mention and are accustomed to one-off and low volume custom production.

      Gerry
       

    Share This Page